Table of Contents
Advertisement
1. Please refer to this link to install USB Blaster II driver :
2.
For the UART driver of HPS and system monitoring, please refer to section 4.1.
2.1. Board Protection
The temperature of Mercury A2700 Accelerator Card will have a lot to do with the
user's design code, chassis, and ambient temperature. When using Mercury A2700
Accelerator Card in the server. Customers should pay attention to whether the
temperature of Mercury A2700 Accelerator Card is too high to avoid abnormal work for
user's design or even damage to the board.
The Dashbaord_gui software (see chapter 4 of this user manual) is provided in the
system CD to allow users to monitor the temperature status of the board. A
temperature monitor IP is also provided so that the user can directly monitor the
temperature status in the Agilex FPGA.
If the board temperature is too high, it is recommended that customers can switch the
PCIe slot position in the server chassis or increasing the fan strength in the chassis, or
replace the chassis to a big space, or reduce the ambient temperature to improve
cooling system.
MA27
User Manual
Figure 1-5 The Micro USB port
10
Terasic Wiki
www.terasic.com
February 17,
2024
Advertisement
Table of Contents
