Table of Contents
Advertisement
D6
MAX_CONF_DONEn
D5
D4
D3
D14
D13
Setup PCI Express Control DIP switch
The PCI Express Control DIP switch (SW8) is provided to enable or disable different
configurations of the PCIe Connector (See
controls and description.
MA27
User Manual
MAX_LOAD
MAX_ERROR
BOOT_PAGE
JTAG_RX
JTAG_TX
20
Illuminates when the FPGA is successfully
configured.
Illuminates when the MAX 10 FPGA System
Controller is actively configuring the FPGA.
Illuminates when the MAX 10 FPGA System
Controller fails to configure the FPGA.
Illuminates when FPGA is configured by the
factory configuration bit stream.
Illuminates when the USB Blaster II circuit is
transmitting data
Illuminates when the USB Blaster II circuit is
receiving data
Figure
2-8).
Table 2-2
lists the switch
www.terasic.com
February 17,
2024
Advertisement
Table of Contents
