Table of Contents
Advertisement
mode, so MAX10(VTAP10) is visible on the JTAG bus.
Figure 3-5
shows the standard QSPI Flash programming steps. Users first need to
convert the bit stream file (.sof) generated by their Quartus project into a Programmer
Object File (.pof) file through the Programming File Generator tool. Then use the
Quartus Programmer tool to connect with the System MAX10 FPGA on the MA27
board through the JTAG interface and program the .pof file into QSPI Flash. In order to
help users easily and quickly program the QSPI Flash on the board, Terasic provides
some batch files so that users can quickly complete the operations for the QSPI Flash
such as erasing and programming. Users can find these batch files under the path:
\System CD\Demonstrations\AVSTx8_Restore.
Users can copy this "AVSTx8_Restore" folder to Host for further use.
Table 4-2
is the file list and descriptions in the AVSTx8_Restore folder.
Table 4-2 File list and descriptions of the batch file folder
Example Folder
factory.sof
user.sof
sof_2_pof.bat
MA27
User Manual
Figure 3-5 Program Flash flow
The bit stream file to be programmed into the factory
image area of the QSPI Flash.
The bit stream file to be programmed into the user image
area of the QSPI Flash.
sof_2_pof.bat merges factory.sof, user.sof, and option bit
to AVTSx8.pof file.
90
Description
www.terasic.com
February 17,
2024
Advertisement
Table of Contents
