Terasic Mercury A2700 User Manual page 100


CONF_DONE
Stands for FPGA configure done status. When this status is shown in green
on the GUI, it means that FPGA configuration has been completed.

FPGA/Board/Transceiver Temperature: The Dashboard GUI will real-time show
the Mercury A2700 Accelerator Card's ambient temperature (Board,Board2 and
Board3 data in the GUI) and FPGA and Power transceiver temperature. Users
can get the board's temperature status in time. The information will be refreshed
per 1 second, and displays through diagram and number, as shown in
Figure 4-10 shows the location of the two temperature sensors of Board and
Board2 on the GUI.
MA27
User Manual
Figure 4-8 FPGA Status section
100
Figure 4-9.
www.terasic.com
February 17,
2024