Table of Contents
Advertisement
USB to UART driver location
Users can find it from the path: Tool\dashboard_gui\Driver in the Mercury A2700
Accelerator Card system CD and copy it to the Host.
Connection Setting
1.
Connect the Micro USB connector of the Mercury A2700 Accelerator Card to the
Host USB port through Micro USB cable.
Figure 4-2 Connection setup for using dashboard system
2.
Connect power to the Mercury A2700 Accelerator Card.
3.
Power on the Mercury A2700 Accelerator Card.
Install Driver
When connect the Mercury A2700 Accelerator Card to the Host. As shown in
4-3, two USB to UART Com Port device is shown in "Device Manager" of Host.
MA27
User Manual
95
Figure
www.terasic.com
February 17,
2024
Advertisement
Table of Contents
