Detailed descriptions for each configuration methods are list in below.
Avalon-ST x8
Avalon-ST is the fastest configuration scheme for intel Agilex® 7 device. When using
this mode, while power up the board, the System MAX10 FPGA on the board (used as
an external host) will read the configuration file in the Flash, and then programming the
data into the FPGA through the Avalon-ST protocol.
On DE10-Agilex board, the data bus width of Avalon-ST mode is 8-bit (Avalon-ST x 8
mode). To set board to Avalon-ST mode, users need to set MSEL[2:0] to "110" (See
Setup Configure Mode part of the section 2.3). For how to program the configuration
MA27
User Manual
Figure 2-3 The MSEL pin setting
14
www.terasic.com
February 17,
2024