Installing By Connecting This Machine To An Outside Network; Using The Touch Panel Display To Install (Delivery) - Canon imagerunner advance 8205 Setup Manual

Installing by Connecting
This Machine to an
Outside Network
If the machine is connected to an external
network, you can install system options/MEAP
applications via a delivery server. Install using one
of the following procedures.
• See "Using the Touch Panel Display to Install (Delivery), " on p. 74.
• See "Using the Remote UI to Install (Delivery), " on p. 75.
• To check that the transmission with the delivery server is
properly operating, if necessary, perform a transmission test
before installation. (See "Using the Touch Panel Display, " on p. 82,
and "Using the Remote UI, " on p. 84.)
• Prepare the License Access Number certificate that was included
in the package.
• When you install MEAP applications, you must start the
application before using the MEAP application. (See "Starting
the MEAP Applications, " on p. 79.)
3
Using the Touch Panel
Display to Install (Delivery)
You can install system options/MEAP applications in the
machine using the touch panel display.
• The maximum number of MEAP applications that can be
installed is 19.
• The maximum amount of hard disk space allocated to install
MEAP applications is 1 GB.
• There may be other system requirements for installation,
depending on the MEAP application. For more information, see
the manual provided with each MEAP application.
1
Press (Settings/Registration)→ [Management
Settings] → [License/Other] → [Register/Update
Software].
2
Press [Install Applications/Options].
74
3
Press [License Access Number].
4
Enter the license access number four digits at a
time.
Enter four digits of the license access number
Repeat this step four times to enter a total of 16 digits for the
License Access Number.
5
Press [Start].
press [OK].
→