Table of Contents
Advertisement
FocusMonitor FM+
9.7.2
Adjust the measurement track manually
In a window in the upper area of the
Settings tab, the measurement plane is
displayed graphically:
•
the entire measurable area (thin lines)
•
the measurement track to be recorded
(thick lines)
•
the measuring position on the z-axis
•
after performing a beam find and during
the measurements, a false color view of
the recorded area
measurement track
Create a
X Position the mouse pointer anywhere
within the measurement range.
Drag while holding down the left
mouse button. Keep the mouse button
pressed until the measurement track
meets your requirements.
Adjust the position:
X Enter the x-/y-position of the track
center in the corresponding input fields.
X Position the mouse pointer over the
measurement track. Drag while holding
down the right mouse button.
With a laser beam displayed:
X To zoom to the center of the graphic
representation, first move the mouse
pointer over the graphic representation
until the plus/minus buttons appear.
Then press the buttons.
X To zoom in on the position of the
mouse pointer, position the mouse
pointer anywhere within the graphic
representation.
Then turn the mouse wheel.
X To zoom to the size of the measuring
range. Position the mouse pointer
within the measuring range.
Then double-click left.
Revision 08 EN - 08/2023
:
Measuring range
(thin line)
Measurement track
(thick line)
Measuring position
on the z-axis
49
Advertisement
Table of Contents
