Table of Contents
Advertisement
9.5.3
Entries for the measuring tip used
For traceability of the measurements performed with a specific measuring tip, the specifications of the measuring
tip used can be entered into the LDS.
The specifications are indicated on the packaging of the measuring tip. Missing entries have no effect on the
measurements performed.
1.
After opening the Device Control
menu, click the Advanced button.
2.
Select the Type of measuring tip used
from the drop-down list.
3.
Enter the serial number S/N of the
measuring tip used.
4.
Enter the Sensitivity in cts/(MW/cm²)
of the measuring tip used.
5.
Enter the Pinhole diameter in μm of
the measuring tip used.
6.
Click the Save device parameters
button.
9.5.4
Display device orientation
Clicking the gear icon
displays the device
orientation.
<<
Clicking the arrow icon
previous view.
40
will return to the
FocusMonitor FM+
Revision 08 EN - 08/2023
Advertisement
Table of Contents
