Table of Contents
Advertisement
6
Installation and settings on the PC
6.1
Install LaserDiagnosticsSoftware LDS
The basic version of LDS is included with the device. PRIMES will also be happy to provide you
with a link to download the current version. Please contact your sales partner or contact us by
email: support@primes.de
1.
Please ensure:
•
System requirements are met.
•
You have administrator rights.
2.
Close all programs on your PC.
3.
Insert the PRIMES thumb drive into
your PC and open the directory.
In the standard configuration, Windows
automatically opens the removable
storage device.
4.
Double-click the LDS_Setup exe file
to start the installation.
5.
Follow the instructions on the screen.
If no other Iocation is specified, then
the main program LDS.exe
will be copied to the directory
C:\Programs\Primes\LaserDiag-
nosticsSoftware.
6.2
Set IP address of PC
The PC must be in the same IP address range as the PRIMES device.
Choose one of the following options to establish a connection between the PRIMES device and the PC.
The IP address of the PRIMES device can only be changed once this connection has been established
(see chapter chapter 9.3.2 „Changing the IP address of a connected device" on page 30).
Integration of a PRIMES device into a network
Within the PRIMES device, the option DHCP (Dynamic Host Configuration Protocol) is activated by default.
The device obtains its IP address from the DHCP server.
Direct connection of a PRIMES device to a PC
In Windows > Control panel > Network and Sharing Center, assign an IP address to your PC that is in
the same address range as the PRIMES device (e.g. 192.168.116.xyz). The first three number blocks must
be identical, the last number block can be freely selected. The IP address should be entered by a system
administrator.
The IP address of your PRIMES device can be found on the identification label.
16
System requirements:
•
Intel Pentium Core i3 or better
•
Windows 10 (64-bit version)
•
At least 4 GB RAM; 8 GB RAM recommended
•
Display resolution: Full HD (1 920 x 1 080) at 100 % scaling
•
An Ethernet port for connecting the measuring device
FocusMonitor FM+
Revision 08 EN - 08/2023
Advertisement
Table of Contents
