Table of Contents
Advertisement
FocusMonitor FM+
9.3
Connect/disconnect the device to the LDS
9.3.1
Switch on the device and connect it to the LDS
1.
Switch on the device.
2.
Start the LDS by double-clicking on the program icon
The start screen appears.
3.
Select the operating mode Measure.
If the Show start screen option is disabled
or the window Connections is closed:
X Click on the Devices tab and then on
the + Connect to device button.
The Connections window appears.
4.
Click on the desired device.
5.
Click on the Connect to device button.
If the device does not appear:
X Click on the Search the network
button.
If the device still does not appear in the
Connections window, see chapter 10.2
„Connection error when using the LDS"
on page 66.
Revision 08 EN - 08/2023
in the start menu group or on the desktop icon.
29
Advertisement
Table of Contents
