Table of Contents
Advertisement
9.10.2
Apply a caustic suggestion (optional)
After the measurement is completed,
a z-area is displayed in the suggested
caustic fields, the limits z1/z2 of which
are at a distance of ± 3Rayleigh lengths
from the determined beam focus.
1.
If you want to accept this suggestion,
click the Apply button.
The suggested values for the z1/z2
limits are transferred to the z-axis
position (z1/z2) fields in mm.
2.
Start and stop the measurement
according to chapter 9.10.1 „Start
measurement" on page 59.
9.10.3
Display measurement results
The measurement results are displayed
in the opened tool during and after the
completed measurement.
X PRIMES recommens checking the
quality of the results after a measure-
ment.
Depending on the results, it may be
necessary to repeat the measurement
with improved measurement setup or
changed parameters.
X For a detailed description of the file
management and evaluation of the
measured data, please refer to the
separate operating manual LDS.
60
FocusMonitor FM+
Revision 08 EN - 08/2023
Advertisement
Table of Contents
