Table of Contents
Advertisement
FocusMonitor FM+
9.9.2
Adjust the measurement window manually
In a window in the upper area of the
Settings tab, the measurement plane is
displayed graphically:
•
the entire measurable area (thin lines)
•
the measurement window to be
recorded (thick lines)
•
the measuring position on the z-axis
•
after performing a beam find and during
the measurements, a false color view of
the recorded area
measurement window
Create a
X Position the mouse pointer anywhere
within the measurement range. Drag
while holding down the left mouse
button. Keep the mouse button
pressed until the measurement window
meets your requirements.
Adjust the position:
X Enter the x-/y-position in the corre-
sponding input fields.
X Position the mouse pointer over the
measurement track. Drag while holding
down the right mouse button.
With a laser beam displayed:
X To zoom to the center of the graphic
representation, first move the mouse
pointer over the graphic representation
until the plus/minus buttons appear.
Then press the buttons.
X To zoom in on the position of the
mouse pointer, position the mouse
pointer anywhere within the graphic
representation.
Then turn the mouse wheel.
X To zoom to the size of the measuring
range. Position the mouse pointer
within the measuring range.
Then double-click left.
Revision 08 EN - 08/2023
:
Measuring range
(thin line)
Measurement window
(thick line)
Measuring position
on the z-axis
57
Advertisement
Table of Contents
