Table of Contents
Advertisement
9.3.2
Changing the IP address of a connected device
Within the device a static IP address is stored and the function Use DHCP is activated. When establishing a
connection, the device will first wait to be assigned a suitable IP address via DHCP. If this prooves unsuccess-
ful, it will revert to the static IP address.
If Use DHCP is disabled, the device will directly use the static IP address. As a result, the connection can be
established faster.
For a connected device, both the IP address and the activation of DHCP can be changed.
Change the IP address of a device as follows:
1.
Click on the Devices tab.
2.
Right-click on the device and select
the Device settings menu point.
3.
Enter the desired IP address in the
Static IP address input field.
4.
Deactivate Use DHCP.
5.
Confirm the entry with OK.
The Confirmation window appears.
6.
In the Confirmation window, place
a check mark at Acknowledge and
click OK.
7.
Switch the device off and on again.
30
FocusMonitor FM+
Revision 08 EN - 08/2023
Advertisement
Table of Contents
