Table of Contents
Advertisement
7.2.4
Mount the device
DANGER
Serious eye or skin injury due to laser radiation
If the device is moved from its aligned position, increased scattered or directed reflection of the
laser beam occurs during measuring operation (laser class 4).
X Mount the device so that it cannot be moved by an unintentional contact or cables being pulled
accidentally.
The mounting surface of the housing has 8 slotted holes Ø 6.4 mm and 4 alignment holes Ø 6
on a support bracket provided by the customer.
Use at least four M6 screws to fasten the housing. The total length of the screws depends on the dimensions
of the customer's support bracket.
Slotted holes Ø 6,4
Alignment holes Ø 6
Fig. 7.9:
Mounting holes, view from above (same hole pattern below) (Dimensions in mm)
22
Slotted holes Ø 6,4
H7
FocusMonitor FM+
mm for assembly
H7
Revision 08 EN - 08/2023
Advertisement
Table of Contents
