Table of Contents
Advertisement
9.7.3
Start measurement
1. Observe the warning messages in
chapter 9.1 „Warning messages" on
page 27.
2.
Click the Start button.
The measurement begins.
Optional:
X Click the Stop button to abort the
measurement.
X Click the Stop Rotation button to
stop the rotation of the measuring tip.
During the measurement, the progress
is shown in the following indicators:
Measurement:
While the indicator is rotating, the measure-
ment is performed.
Measurement completed:
After successful measurement, the indicator
lights up green.
3.
Switch off the laser after the measure-
ment is completed, unless you want
to perform further measurements.
9.7.4
Display measurement results
The measurement results are displayed
in the opened tool during and after the
completed measurement.
X
PRIMES recommens checking the quality
of the results after a measurement.
Depending on the results, it may seem
necessary to repeat the measurement
with improved measurement setup or
changed parameters.
X For a detailed description of the file
management and evaluation of the
measured data, please refer to the
separate operating manual LDS.
50
FocusMonitor FM+
Revision 08 EN - 08/2023
Advertisement
Table of Contents
