Table of Contents
Advertisement
FocusMonitor FM+
10
Troubleshooting
10.1
Messages in the LaserDiagnosticsSoftware LDS during measurement
If problems occur during a measurement, the LDS displays them in different categories and different colors.
Note
Notes provide assistance in interpreting the measurement
results and are displayed in a blue window.
Use one of the following options:
X Click on the warning triangle in the footer to display/hide
the window.
X If applicable, click the Next message button to display
more messages of the same category.
X Click the Confirm button to remove the displayed message.
Warning
Non-safety-critical problems that influence the quality of the
measurement results, for example, are displayed in a yellow
window.
Use one of the following options:
X Click on the warning triangle in the footer to display/hide
the window.
X If applicable, click the Next message button to display
more messages of the same category.
X Click the Confirm button to remove the displayed message.
Device error
Device errors that can result in damage of the device are displayed
in an orange window.
In this case, proceed as follows:
1.
Fix the problem.
2.
Click the Confirm button to remove the message.
The message disappears. If the problem is not fixed, then
the message appears again shortly afterwards.
3.
Do not proceed with the measurement until the problem is
solved.
Safety critical note
Safety-critical problems that can result in damage/destruction
of the device are displayed in a red window.
In this case, proceed as follows:
1.
Fix the problem immediately.
2.
Click the Confirm button to remove the message.
The message disappears. If the problem is not fixed, then
the message appears again shortly afterwards.
3.
Do not proceed with the measurement until the problem is
solved.
Revision 08 EN - 08/2023
65
Advertisement
Table of Contents
