Table of Contents
Advertisement
FocusMonitor FM+
Further icons and conventions in this operating manual
Here you will find useful information and helpful tips.
Indicates a single instruction.
X
If several of these instructions appear one below the other, the order in which they are executed is
irrelevant or they represent alternative courses of action.
1.
A numbered list identifies a sequence of instructions that must be executed in the specified order.
2.
...
Indicates the result of an action to explain processes that take place in the background.
Indicates an observation prompt to draw attention to visible feedback from the device or the software.
Observation prompts make it easier to check whether an instruction was executed successfully.
Often they also guide to the next instruction.
Points to a control element that is to be pressed/clicked.
Points to an element described in the text (for example an input field).
3
About this operating manual
This manual describes the installation and operation of the FocusMonitor FM+ and how to perform measure-
ments with the LaserDiagnosticsSoftware LDS version 3.0 or higher.
In this operating manual, the abbreviations FM+ and LDS are used below.
For measurement operation with a PC, the LDS must be installed on the PC. The LDS in the basic version is
included in the scope of delivery. PRIMES will also be happy to provide you with a current download link.
For this purpose, contact your sales partner or send an e-mail to: support@primes.de
The software description includes a brief introduction on using the device for measurements. For a detailed
description of the software installation, file management and evaluation of the measurement data, please
refer to the separate instructions for the LDS.
This operating manual describes the software version valid at the time of printing. Since the LDS is
subject to continuous development, the supplied data medium may have a newer version number.
Revision 08 EN - 08/2023
11
Advertisement
Table of Contents
