Coordinate System For Rotated Measuring Tip - Primes FocusMonitor FM+ Original Instructions Manual

9.5.6

Coordinate system for rotated measuring tip

The coordinates given as the z-position when measuring always relate to the device coordinate system,
which changes when the device or measurement tip is rotated.
For standard installation
The figure shows the device in its park
position.
For upside down installation with rotated
measuring tip
The figure shows the device in its park
position.
If the device is operated in its rotated
position and the Measuring tip rotated
option has been selected, the orientation
of the z-axis is rotated.
42
z-axis
120
100
80
60
40
20
y-axis
0
Device coordinate system
z-axis
120
100
80
60
40
20
y-axis
0
Device coordinate system
FocusMonitor FM+
Laser
z=120 mm
z=0 mm
Park position
Laser
z=120 mm
Park position
z=0 mm
Revision 08 EN - 08/2023