Setting The Phase Bar Graph Scale Position; Setting The Window And Bar Graph Positions; Setting The Colours Of The Bar Graphs; Setting The Level Bar Graph Region Colour - evertz 7735CEM Manual

7.7.10. Setting The Phase Bar Graph Scale Position

Bar graphs
Bar graphs 1 and 2
Phase scale
Top
Bottom
None

7.7.11. Setting The Window And Bar Graph Positions

Bar graphs
Bar graphs 1 and 2
Window position

7.7.12. Setting the Colours of the Bar Graphs

Each of the level bar graphs consists of three regions: the OK, warning and error regions. The Colours
menu items allow you to select one of a group of standard colours, or choose your own custom colours for
each of the regions. The controls for each region operate the same way so for simplicity only the controls
for the OK region will be shown in the manual.
Tip: The colours of the various regions are defined by three 8 bit R, G, B values very similar to the values
used in most paint programs like Microsoft Paint. When you choose one of the predefined colours, the
card automatically sets the R, G, and B values. If you choose the custom colour, you will be able to set the
R, G, and B values independently to give you the desired colour. If you are having problems setting these
values with the menu system, open a paint program, select the colour you like (usually from a colour
wheel) and set the R, G, and B values into the card using the respective Custom colour menu items for the
region.

7.7.12.1. Setting the Level Bar Graph Region Colour

Bar graphs
Bar graphs 1 and 2
Colours
OK region
White
Black
Grey
Yellow
Red
Green
Custom...
7.7.12.1.1.

Selecting a Bar Graph Region Custom Colour

There are three menu items used to set the custom colour. The menu item for each colour component
works in the same way so for simplicity only the menu item for the Red component will be shown in the
manual.
Gray background indicate un-implemented or un-tested features
7735CEM Composite Encoder with Monitoring
This control allows you to enable and position the phase bar graph scale
tick marks and the scale labels with respect to the bar itself. When off,
there will not be any ticks or numerical labels while top or bottom will
position them to the top or the bottom of the phase bar graph
respectively.
This control allows you to change the window positions of all windows
and bar graphs. The window positions can also be set from the Window
position menu item on the On-screen display configuration menu. See
section 7.8.2 for detailed information on the position of the windows and
bar graphs.
This control sets the colour of the bottom, "OK", region of level bar graphs.
You can choose from one of the predefined colours or define a custom
colour.
Revision 1.1.1
7700 MultiFrame Manual
7735CEM-33