The Character Window Pushbutton Group; The Display-Pushbutton Group; An Overview Of The Status Indicators - evertz 5010 SIE Instruction Manual

OPERATING INSTRUCTIONS

3.1.2. The Character Window Pushbutton Group

CHAR GEN WINDOW
highlights the Time VCG window. Use the arrow keys to move
the window, use the CHAR GEN ON/OFF key to turn the
window on or off. Press the WINDOW key again to select the
SRC ID VCG window. Press the WINDOW key again to select
the STATUS VCG window. Press the WINDOW key a fourth
time to return to the normal VCG display mode.
CHAR GEN ON/OFF Turns the character generator ON and OFF. When
in the VCG window select mode the CHAR GEN ON/OFF key is
used to turn individual windows ON and OFF.

3.1.3. The Display-Pushbutton Group

DISPLAY Selects what data is being displayed on the front panel. Each
time it is pressed it cycles to the next display data.

3.1.4. An Overview of the Status Indicators

There are 6 status indicators located on the front panel that show
operational status of the 5010-SIE at a glance.
TIME Indicates that 5010-SIE is transferring time information received
from the serial port into the time bits of the Source ID VITC.
When it is blinking, it indicates that it is programmed to encode
time information but there is no incoming time data on the serial
port.
STATUS Indicates that 5010-SIE is transferring VTR Status information
received from the serial port into the user bits of the Source ID
VITC. When it is blinking, it indicates that it is programmed to
encode status information but there is no incoming status data
on the serial port.
COMM Indicates that communications to the VTR or 7225 is present.
VIDEO Indicates that the gen-lock reference video is present. If it is
blinking, it indicates a valid video signal is not present.
VITC Indicates that the VITC keyer is enabled.
CHAR Indicates that the character generator keyer is enabled.
Model 5010-SIE Source ID Encoder Manual
Initiates VCG window select mode and
Page 3-3