Registering Screen Frame Size [For Windows Xp/Vista/7/8/8.1/10] - Riso GOCCOPRO QS200 User Manual

1 Getting ready to use
＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿
Registering Screen Frame Size [
.
• You must register the size of "screen frame," not of the image-making area.
• The width and length can be entered in 0.1 mm or 0.001 inch increments.
• You should correctly understand the relationship of the registered screen frame size, the
image-making position, and the size of the image-making. Do not mix them up.
• Registered screen frame size may not be memorized properly due to user authentication.
Please login as administrative user and register a new screen frame size properly.
"Precautions on Image-Making Position" page 19
• The screen frame size can be set in
the following ranges.
X direction: 260 to 780 mm
Y direction: 260 to 580 mm
*) Setting increment: 0.1 mm (0.001
• Up to 30 screen frame sizes can be
registered.
• The screen name to be entered can
only consist of numbers, alphabetical
letters, spaces, symbols, and Kana,
Katakana, and Kanji characters, and
must be maximum 32 bytes (mixed) in
length., The characters of ", *, /, :, <,
>, ?, \, and | cannot be used.
1
On [Devices and Printers] dialog box, double-click
[RISO GOCCOPRO QS200 Driver] icon to open
the properties of this printer.
: (10.23 to 30.71 )
inch
: (10.23 to 22.83 )
inch
For Windows XP/Vista/7/8/8.1/10
2
Click [Printing preferences].
")
3
(1) [RISO GOCCOPRO QS200 Driver Printing
Preferences] dialog box appears. Click the [Basic]
tab, and edit and register the size of screen frame.
(2) The default setting after the installation of
printer driver is "Maximum Size" only.
(1)
(2)
｜40｜
]