Scanning - Riso ComColor GL Series Quick Manual

Getting Started
You can select either [Mail], [PC], or [Console] as the destination for sending or storing the data.
In this section, the procedure for sending the data to a computer is described as an example.
1.
Load the original.
2.
Touch [Scan] - [PC] on the [Home1] screen.
Select [Mail] to send the scanned data by e-mail, or
select [Console] to save the scanned data to the
internal solid state drive (SSD) of this machine.
3.
Touch [Destination], and select the destination.
Change the settings as needed.
For [Mail], touch [Address] to configure the address. For
[Console], it is not necessary to configure the
destination.
4.
Press the [Start] key.
14

Scanning

Start
ComColor GL Series Quick Guide