About The Administrator; Procedure For Configuring An Administrator; Administrator Authority; Administrator Settings - Riso ComColor Series Administrator's Manual

About the Administrator

Procedure for configuring an administrator

The configuration workflow is as follows.
Set the administrator
1
password
Login as a user with
2

administrator authority

Configure the
3

administrator settings

● To use this machine as a network printer, configure an IP address in "Network setting" first.
● To configure the default in copy or scanner mode, login as a user with administrator authority, and then proceed
to the mode screen. (See p. 28)
Administrator Authority
The administrator has the following two administrator authority.
• Changing the default and setting the usage environment.
• Accessing functions that can only be used by the administrator when using this machine.
■ Administrator settings
The administrator can configure the settings described in "Administrator Settings" (See p. 10).
For information on how to configure the settings, see "Configuring the Administrator Settings" (p. 8).

■ Functions only for the administrator

There are some functions that can only be used by the administrator when using this machine.
These functions can be controlled by logging in as an administrator as follows.
Login as a user with administrator authority.
1
2 Press [Admin mode] on the mode screen.
Press a mode button.
3
ComColor Series Administrator's Guide 08
5