Layout Tab; Image Tab - Riso ComColor 9150 Basic Manual

Layout Tab

[Imposition]
Select the type of layout-specifically, how originals are arranged for
printing. The options displayed vary depending on the type of
layout.
• [Pages/sheet] and [Layout order] are not displayed if you
select [OFF].
• [Layout order] is not displayed if you select [Multi-up
(Single)].
• [Pages/sheet] is not displayed if you select [Booklet].
[Pages/sheet]
Select the number of pages per sheet.

Image Tab

[Original image]
Select whether to emphasize the image quality of photos or text in originals.
[Original image] is not available for ComColor 2150.
[Line smoothing]
Smooth the outline of printed text. Select from two steps due to the
image process.
Printing speed slows down if you have selected [Line
smoothing].
[Envelope image enhancement]
Prevent image blurring and staining when printing envelopes.
Complete settings on this tab to print multiple pages per sheet, or to
print images rotated.
[Layout order]
Specify the order in which originals are arranged on a single sheet.
Options will vary depending on your selected number of pages in
[Pages/sheet].
[Rotate]
For envelope printing, specify the angle of rotation for images.
[Image position]
Adjust the printing position of images, as desired. Selecting this
option will display additional options under [Details], where you can
specify details such as the direction and amount of adjustment.
[Save/Call setting], [Entry/Clear], and [Restore default]
See "Basic Tab"(p. 44).
Complete image processing settings on this tab, such as for image
quality and density.
[Gamma control]
Adjust the gamma value of colors, as desired. Selecting this option
will display additional options under [Details].
[Screening]
Specify the method of halftone processing. (See p. 46.)
[Image quality]
Specify the print resolution. If you select [Standard], [Details]
appears, and you can adjust the data size in [Data compression] and
the amount of ink in [Draft].
• Printing speed slows down if you have selected [Fine].
• If you set to [Data compression] or [Draft], the neutral
colors become uneven.
[Print density]
Specify the print density.
[Barcode area definition]
Set the print density of the area around a barcode so that a printed
barcode can be read.
[Barcode area proof]
Check the area you have set to [Barcode area definition].
The specified part can be printed out with shade process. For details,
see "Using the Barcode Area Definition Application"(p. 101).
[Save/Call setting], [Entry/Clear], and [Restore default]
See"Basic Tab"(p. 44).
Basic use >> Printer Driver Screens
ComColor Series Basic Guide 06
2
45