[Finishing] Tab - Riso ComColor FT Series User Manual

[Auto], [0 deg], [90 deg], [180 deg], [270 deg]
When [Auto] is selected, the print orientation is set
automatically according to the orientation of the
document data and the orientation of the paper
loaded in the paper tray. For normal use, select
[Auto].
• To align the print orientation with an envelope
^ ^
or other paper with a fixed feeding direction,
specify the angle of rotation.
• [Auto] may be the only option available
depending on the document size, the size and
orientation of the paper loaded in the tray, and
other settings.

[Finishing] Tab

Binding Edge
^ ^
Specify the binding margin.
[Left], [Right], [Top]
Binding Margin Settings

Select the binding edge and click [Details] to
display the [Binding Edge] dialog box.
Specify the margin width.
Select the [Auto Reduction] check box to
automatically reduce the printed image to fit the
paper in cases where the margin width does not
allow for the original-scale printed image to fit into
the paper.
^ ^ Staple
If you are using the optional face down finisher,
you can staple at the specified position.
For more information, see the following pages:
• when using the optional face down finisher
(p.168 "Staple")
• when using the optional multifunction finisher
(p.179 "Staple")
Punch
^ ^
If you are using the optional multifunction finisher
with the punch unit, you can configure holes to
punch.
For more information, see "Punch" (p.182) in
"Optional Equipment".
ComColor FT Series User's Guide
Printer Driver Settings
113
3