Jobs Stop As Idle Status In The Active Tab - Riso ComColor IS900C Instruction Manual

Jobs stop as Idle status in the Active tab

If the machine does not print any jobs for a long time as "Idle status", system program in the HDD might be crashed.
(Enable to print from PC but unable to copy, unable to print everything etc)
1. You should make a backup user settings using *TM460, and also you should retrieve the user list
console just in case. (Please refer to the M8-5 and F3-3
2. Perform the HDD initialization using TM504 and TM510
3. If this symptom still occurs, you should replace the HDD
Backup data might be crashed too, if this symptom occurs again after re-install the backup data, you should initialize
HDD again, then you can set up user data using the CSV file via RISO console.
164
too)
Maintenance
Electrical problem
*CSV file via RISO