Saving To Rv Card; Redundancy; Presets; Inputs Backup - NovaStar MCTRL660 PRO User Manual

MCTRL660 PRO Independent Controller
User Manual
Table 7-2 Image parameters
Parameter
Color temperature
Red/Green/Blue
Gamma
Contrast
Saturation
Hue

7.8.5 Saving to RV Card

By using this function, you can:




7.8.6 Redundancy

Set the controller as the primary or backup device. When the controller works as a
backup device, set the data flow direction as opposite to that of the primary device.
If the controller is set as the backup device, when the primary device fails, the backup
device will immediately take over the work of the primary device, that is, the backup
takes effect. After the backup takes effect, the target Ethernet port icons on the home
screen will have marks on top flashing once every 1 second.

7.8.7 Presets

Choose Advanced Settings > Presettings to save current settings as a template.
Up to 10 presets can be saved.




7.8.8 Inputs Backup

Set a backup video source for each primary video source. Other input video sources
supported by the controller can be set as backup video sources.
After a backup video source takes effect, the video source selection is irreversible.
Table 7-3 Video source backup
No.
Backup 1
www.novastar.tech
Send and save the configuration information to the receiving cards, including
brightness, color temperature, Gamma and display settings.
Overwrite the information saved to the receiving card earlier.
Ensure that the data saved in the receiving cards will not be lost in the event of
power failure of receiving cards.
Save: Save current parameters as a preset.
Load: Read back the parameters from the saved preset.
Delete: Delete the parameters saved in the preset.
Primary Video Source
HDMI
Description
Range: 4000 K–9500 K, Stepping: 100
Range: 0–255, Stepping: 1
Range: 1.0–4.0, Stepping: 0.1
Range: 0%–100%, Stepping: 1
Range: 0%–100%, Stepping: 1
Range: -180–180, Stepping: 1
7 Menu Operations
Backup Video Source
NULL/DVI/SDI
27