Table of Contents
Advertisement
Figure 6-20 Dynamic Booster
6.7 Apply Presets
Apply a saved preset to complete screen configuration and display effect adjustment with one key, allowing you to
quickly start using the CX40 Pro.
On the main menu screen, choose Preset.
The saved presets in VMP will be listed on the screen.
Figure 6-21 Preset
Select the preset to be applied and wait for the loading to complete.
Note:
To complete screen configuration by applying a preset, ensure the cabinet specifications and screen topology
must be the same as those in the preset.
The CX40 Pro supports applying the presets only. To save a preset, follow the steps below in VMP.
Save Presets
After completing the screen configuration and display effect adjustment, you can save the data on the Source,
Layout, Processing and Screen Settings pages as a preset so that these data can be directly applied in the future.
Choose Preset.
On the preset management page, click
To go back to the preset management page, click a blank area in the properties area.
www.novastar.tech
CX40 Pro LED Display Controller User Manual
to enter the page shown in
Figure
6-22.
27
Advertisement
Table of Contents
