Table of Contents
Advertisement
Figure 6-3 EDID
When the device working mode is All-In-One Controller, the Select Input menu is not displayed.
Set Mode to Custom or Standard, and then set the resolution and frame rate.
Custom: Set the resolution manually.
Standard: Select the desired resolution from the drop-down options.
After the settings are done, click Apply.
6.2.3 Adjust Color (HDMI1, HDMI2, HDMI3, DP, SDI)
Set the infoframe override parameters of the external input source and adjust the color. The override parameter will
be used in the calculation of color adjustment. If the value of this parameter is not set manually, the value that comes
with the input source will be used.
On the main menu screen, choose Input Settings >
HDMI3, DP or SDI.
Figure 6-4 Infoframe override
When the device working mode is All-In-One Controller, the Select Input menu is not displayed.
Set the override parameters as required.
Select Auto and the device will read the attribute value that comes with the input source.
Press the BACK button to go back to the upper-level menu.
Select Color Adjustment.
Set the related parameters.
Black level is used to adjust the contrast of the dark areas of the image.
6.2.4 Set HDR (HDMI1, HDMI2 and HDMI3 only)
Set the parameters used during the process of parsing HDR video sources.
On the main menu screen, choose Input Settings >
HDMI3.
www.novastar.tech
MX40 Pro LED Display Controller User Manual
input source
> EDID. The
input source
input source
> HDR. The
input source
is HDMI1, HDMI2,
is HDMI1, HDMI2 or
14
Advertisement
Table of Contents
