Performance And Characteristics - Smartgen HGM9600 Series User Manual

3 PERFORMANCE AND CHARACTERISTICS

HGM9610, used for single automation systems, auto start/stop of the unit performed with the help of
remote signal.
HGM9620, has all functions of HGM9610 as well as mains electric quantity monitoring and
mains/generator automatic transfer control function (AMF), particularly suits for single automation
systems that include mains and generator.
Key characteristics,
♦
With ARM-based 32-bit SCM, highly integrated hardware, higher reliability;
♦
480x272 LCD with backlight, multilingual interface (including English, Chinese or other languages)
which can be chosen at the site, making commissioning convenient for factory personnel;
♦
Improved LCD wear-resistance and scratch resistance due to hard screen acrylic;
♦
Silicon panel and pushbuttons for better operation in high-temperature environment;
♦
RS485 communication port enabling remote control, remote measuring, remote communication via
ModBus protocol;
♦
ETHERNET communication port with multiple monitoring modes;
♦
Micro SD port for recording of real-time operation data;
♦
Equipped with SMS (Short Message Service) function. When genset is alarming, controller can send
short messages via SMS automatically to setting 5 telephone numbers. Besides, generator status
can be controlled and checked using SMS;
♦
Equipped with CANBUS port and can communicate with J1939 genset. Not only can you monitor
frequently-used data (such as water temperature, oil pressure, speed, fuel consumption and so on)
of ECU machine, but also control starting up, shutdown, speed raise and drop via CANBUS port;
♦
Suitable for 3-phase 4-wire, 3-phase 3-wire, single phase 2-wire, and 2-phase 3-wire systems with
voltage 120/240V and frequency 50/60Hz;
♦
Collect and show 3-phase voltage, current, power parameter and frequency of generator or mains.
Mains
Line voltage (Uab, Ubc, and Uca)
Phase voltage (Ua, Ub, and Uc)
Phase sequence
Frequency Hz
Load
Current IA, IB, IC
Each phase and total active power kW
Each phase and total reactive power kvar
Each phase and total apparent power KVA
HGM9600 Series Genset Controller User Manual
Generator
Line voltage (Uab, Ubc, and Uca)
Phase voltage (Ua, Ub, and Uc)
Phase sequence
Frequency Hz
Page 8 of 73