Smartgen HGM9600 Series User Manual page 34

Genset controller
Table of Contents

Advertisement

No.
Items
9
Over Speed Warn
Under
Speed
10
Warn
Battery
Rated
11
Voltage
Battery
Over
12
Volts
Battery
Under
13
Volts
14
Charge Alt Fail
15
Start Attempts
16
Crank Disconnect
Disconnect
17
Generator Freq.
Disconnect
18
Engine Speed
Disconnect
19
Pressure
Generator Setting
1
AC System
2
Poles
HGM9600 Series Genset Controller User Manual
Parameters
(0~200)%
(0~200)%
(0~60.0)V
(0~200)%
(0~200)%
(0~60.0)V
(1~10) times
(0~6)
(0~200)%
(0~200)%
Oil
(0~1000)kPa
(0~3)
(2~32)
Defaults
Setting value is percentage of rated speed
110%
and delay value (default: 5s) and return
value (default: 108%) also can be set.
Setting value is percentage of rated speed
86%
and delay value (default: 5s) and return
value (default: 90%) also can be set.
Standard for detecting over/under voltage
24.0
of battery.
Setting value is percentage of rated
voltage of battery. Delay value (default:
120%
60s) & return value (default: 115%) also
can be set.
Setting value is percentage of rated
voltage of battery. Delay value (default:
85%
60s) & return value (default: 90%) also can
be set.
In normal running, when charger D+(WL)
voltage under this value, charge failure
8.0
alarms. Delay value (default: 10s) & return
value (default: 10.0V) also can be set.
Max. Crank times of crank attempts. When
3
reach this number, controller will send
start failure signal.
See Table 17.
There are 3 conditions of disconnecting
starter with engine. Each condition can be
2
used
alone
separating the start motor and genset as
soon as possible.
When generator frequency higher than the
24%
set value, starter will be disconnected. See
the installation instruction.
When generator speed higher than the set
24%
value, starter will be disconnected. See the
installation instruction.
When generator oil pressure higher than
200
the set value, starter will be disconnected.
See the installation instruction.
0: 3P4W; 1: 3P3W;
0
2: 2P3W; 3: 1P2W.
Numbers of generator pole, used for
4
calculating starter rotate speed when
Description
and
simultaneously
Page 34 of 73
to

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hgm9610Hgm9620

Table of Contents