Yuchai; Weichai - Smartgen HGM9600 Series User Manual

Engine type: Volvo-EMS2.
NOTE: When this engine type is selected, preheating time should be set to at least 3 seconds.

15.19 YUCHAI

It is suitable for BOSCH common rail electronic-controlled engine.
Terminals of controller
Fuel relay output
Start relay output
CAN GND
CAN(H)
CAN(L)
Battery
Battery negative
Battery positive
Engine type: BOSCH.

15.20 WEICHAI

It is suitable for Weichai BOSCH common rail electronic-controlled engine.
Terminals of controller
Fuel relay output
Start relay output
CAN GND
CAN(H)
CAN(L)
Engine type: GTSC1.
NOTE: If there is any question of connection between controller and ECU communication, please feel free to contact
SmartGen's service.
HGM9600 Series Genset Controller User Manual
Table 46 Engine 42-pin Port
Engine 42 pins port
1.40
-
-
1.35
1.34
Table 47 Engine 2-pin Port
Engine 2 pins port
1
2
Table 48 Engine Port
Engine port
1.40
1.61
-
1.35
1.34
Remark
Connect to engine ignition lock.
Connect to starter coil directly.
CAN communication
(connect with controller's this terminal
only).
Using impedance 120Ω connecting line.
Using impedance 120Ω connecting line.
Remark
2
Wire diameter 2.5mm
Wire diameter 2.5mm 2
Remark
Connect to engine ignition lock.
CAN communication
(connect to the controller at this end
only).
Using impedance 120Ω connecting line.
Using impedance 120Ω connecting line.
shielding line
.
.
shielding line
Page 68 of 73