Cummins Qsz13; Detroit Diesel Ddec Iii / Iv - Smartgen HGM9600 Series User Manual

15.7 CUMMINS QSZ13

Terminals of controller
Fuel relay output
Start relay output
Auxiliary output 1
Auxiliary output 2
CAN GND
CAN(H)
CAN(L)
Engine type: Common J1939.

15.8 DETROIT DIESEL DDEC III / IV

Terminals of controller
Fuel relay output
Start relay output
CAN GND
CAN(H)
CAN(L)
Engine type: Common J1939.
HGM9600 Series Genset Controller User Manual
Table 31 Engine OEM Connector
OEM connector of engine
45
-
16&41
19&41
-
1
21
Table 32 Engine CAN Port
CAN port of engine
Expand 30A relay,
voltage of ECU is supplied by
relay.
-
-
CAN(H)
CAN(L)
Connect to starter coil directly
Setting to idle speed control, normally
open output. Making 16 connect to 41
during high-speed running of controller
via external expansion relay.
Setting to pulse raise speed control,
normally open
connect with
high-speed warming of controller via
external expansion relay.
CAN communication
(connect with controller's this terminal
only).
Using impedance 120Ω connecting line.
Using impedance 120Ω connecting line.
battery
Connect to starter coil directly.
CAN communication
(connect with
only).
Using impedance 120Ω connecting line.
Using impedance 120Ω connecting line.
Remark
output. Making 19
41 for 0.1s during
shielding line
Remark
shielding line
controller's terminal
Page 63 of 73