Overview; Performance And Characteristics - Smartgen HGM410DC User Manual

1

OVERVIEW

HGM410DC Genset Controller integrates digitization, intelligentization and network technology which
are used for genset automation and monitor control system of single unit to achieve automatic
start/stop, data measure, alarm protection and "three remote" (remote control, remote measuring and
remote communication). It fit with LCD display, optional Chinese/English/Spanish/Russian/Turkish
languages interface, and it is reliable and easy to use.
The powerful 32-bit ARM processor contained within the module allows for precision parameters
measuring, fixed value adjustment, time setting and set value adjusting and etc. All parameters can be
configured from front panel and they can be configured or monitored via auxiliary interface on PC (SG72
module produced by our company can be used to USB to LINK and RS485 ports). Due to its compact
structure, simple connections and high reliability, HGM410DC can be widely used in several of genset
automation systems.
2

PERFORMANCE AND CHARACTERISTICS

HGM410DC is used for ASM (Automatic Start Module)，it controls generator to start/stop by remote
signal:
——132x64 LCD with backlight, selectable language interface (Chinese, English, Spanish,Russian
and Turkish), push-button operation;
——RS485 Communication Port, which achieves long distance remote control with simple
connection;
——Suitable for 3-phase 4-wire, 3-phase 3-wire, single phase 2-wire, and 2-phase 3-wire systems
with voltage 120/240V and frequency 50/60Hz;
——Collects and shows 3-phase voltage, current, power parameter and frequency of generator or
mains.
Generate

Line Voltage (Uab, Ubc, Uca)

Phase Voltage (Ua, Ub, Uc)

Frequency (Hz)
Load

Current (IA, IB, IC)

Active Power (kW)

Reactive Power (kvar)

Apparent Power (kVA)

Power Factor (PF)
——For generator, controller has over voltage, under voltage, over frequency, under frequency and
over current detection functions;
——Precision collect and display parameters about Engine:

Temp. (WT)

Oil pressure (OP)

Fuel Level (FL)

Engine Speed (RP)
HGM410DC Genset Controller
°C/°F both be displayed
kPa/Psi/Bar all be displayed
% (Unit)
RPM (Unit)
2015-11-12
HGM410DC Genset Controller User Manual
Version 1.0 Page 4 of 34