Wirings Connection - Smartgen HGM9600 Series User Manual

7 WIRINGS CONNECTION

HGM9600 series controller's rear as following:
No. Function
1 B-
2 B+
3 Emergency Stop
4 Fuel Relay Output
5 Start Relay Output
6 Aux. Output 1
7 Aux. Output 2
8 Aux. Output 3
9 Charger(D+)
10 Aux. Input 1
11 Aux. Input 2
12 Aux. Input 3
13 Aux. Input 4
14 Aux. Input 5
HGM9600 Series Genset Controller User Manual
Fig.3 HGM9600 Rear Panel
Table 12 Description of Terminal Connection
Cable Size
2.5mm 2 Connected with negative of starter battery
Connected with positive of starter battery. If wire length
2
2.5mm is over 30m, better to double wires in parallel. Max. 20A
fuse is recommended
2.5mm 2 Connected with B+ via emergency stop button
1.5mm 2 B+ is supplied by 3 terminal, rated 16A
B+ is supplied by 3 terminal,
2
1.5mm
rated 16A
B+ is supplied by 2 terminal,
1.5mm 2
rated 7A
B+ is supplied by 2 terminal,
2
1.5mm
rated 7A
B+ is supplied by 2 terminal,
2
1.5mm
rated 7A
Connected with charger starter's D+ (WL) terminals.
1.0mm 2
Being hang up If there is no this terminal
1.0mm 2 Ground connected is active (B-)
1.0mm 2 Ground connected is active (B-)
1.0mm 2 Ground connected is active (B-)
1.0mm 2 Ground connected is active (B-)
2
1.0mm Ground connected is active (B-)
Remarks
Connected
starter coil
Details see
14
Details see Table
15
Page 29 of 73
to
Table