Key Functions - Smartgen HGM9600 Series User Manual

5.2

KEY FUNCTIONS

Icon
Stop
Start
Manual Mode
Auto Mode
Mute/Reset Alarm
Gen Close/Open
Mains Close/Open
Close
Open
Up/Increase
Down/Decrease
Left
Right
Set/Confirm
Exit
NOTE: In manual mode, pressing
start will not be judged according to crank disconnect conditions, operator will have to crank the starter motor manually;
HGM9600 Series Genset Controller User Manual
Table 6 Key Function Description
Key
Stop running genset in Auto/Manual mode; Lamp test (press
at least 3 seconds); Reset alarm in stop mode; During stopping
process, press it again to stop genset immediately.
Start genset in Manual mode.
Press it and controller enters Manual mode.
Press it and controller enters Auto mode.
Alarming sound off; If there is trip alarm, pressing the button
at least 3 seconds can reset this alarm.
Control gen close/open in manual mode. (unavailable for
HGM9610)
Control mains close/open in manual mode. (unavailable for
HGM9610)
Control close breaker in manual mode. (unavailable for
HGM9620)
Control open breaker in manual mode. (unavailable for
HGM9620)
1) Screen scroll;
2) Up cursor and increase value in setting menu.
1) Screen scroll;
2) Down cursor and decrease value in setting menu.
1) Page scroll;
2) Left move cursor in setting menu.
1) Page scroll;
2) Right move cursor in setting menu.
1) Select viewing area;
2) Press it over 3s can enter parameter setting;
3) Confirm setting information.
1) Return to main menu;
2) Return to previous menu in setting menu.
and
Function Description
simultaneously will force generator to crank. Successful
Page 14 of 73