Smartgen HGM9600 Series User Manual page 35

No. Items
3 Rated Voltage
4 Loading Voltage
5 Rated Frequency
Loading
6
Frequency
7 Volt. Trans.(PT)
Over Volt.
8
Shutdown
Under Volt.
9
Shutdown
Over Freq.
10
Shutdown
Under Freq.
11
Shutdown
12 Over Volt. Warn
Under Volt.
13
Warn
14 Over Freq. Warn
15 Under Freq. Warn
16 Loss of Phase
HGM9600 Series Genset Controller User Manual
Parameters Defaults
(30~30000)V
(0~200)%
(10.0~75.0)Hz
(0~200)%
(0~1)
(0~200)%
(0~200)%
(0~200)%
(0~200)%
(0~200)%
(0~200)%
(0~200)%
(0~200)%
(0~1)
without speed sensor.
To offer standards for detecting of
generator' over/under voltage and loading
voltage. (It is primary voltage when using
230
voltage transformer; it is line voltage when
AC system is 3P3W while it is phase
voltage when using other AC system).
Setting value is percentage of generator
rated voltage. Detect when controller ready
85%
to loading. If generator voltage under load
voltage, won't enter into normally running.
To offer standards for detecting of
50.0
over/under/load frequency.
Setting value is percentage of generator
rated frequency.
85%
frequency under load frequency, it won't
enter into normal running.
0 0: Disable;
120% Setting value is percentage of generator
rated volt. Delay value (default: 3s) also
80% can be set.
Setting value is percentage of generator
114% rated freq. Delay value (default: 2s) also
can be set.
Setting value is percentage of generator
80% rated freq. Delay value (default: 3s) also
can be set.
Setting value is percentage of generator
rated volt. Delay value(default: 5s) and
110%
return value(default: 108%) also can be
set.
Setting value is percentage of generator
84% rated volt. Delay value (default: 5s) and
return value (default: 86%) also can be set.
Setting value is percentage of generator
rated freq. Delay value (default: 5s) and
110%
return value (default: 108%) also can be
set.
Setting value is percentage of generator
84% rated freq. Delay value (default: 5s) and
return value (default: 86%) also can be set.
1 0: Disable 1: Enable
Description
When generator
1:Enable
Page 35 of 73