15.14 PERKINS
It is suitable for ADEM3/ADEM4 engine control module. Engine type is 2306, 2506, 1106, and 2806.
Terminals of controller
Fuel relay output
Start relay output
CAN GND
CAN(H)
CAN(L)
Engine type: Perkins.
15.15 SCANIA
It is suitable for S6 engine control module. Engine type is DC9, DC12, and DC16.
Terminals of controller
Fuel relay output
Start relay output
CAN GND
CAN(H)
CAN(L)
Engine type: Scania.
15.16 VOLVO EDC3
Suitable engine control mode is TAD1240, TAD1241, and TAD1242.
Terminals of controller
Fuel relay output
Start relay output
Auxiliary output 1
HGM9600 Series Genset Controller User Manual
Table 40 Connector
Connector
1, 10, 15, 33, 34
-
-
31
32
Table 41 B1 Connector
B1 connector
3
-
-
9
10
Table 42 "Stand alone" Connector
"Stand alone" connector
H
E
P
Remark
Connect to starter coil directly.
CAN
communication
(connect
with
controller's
only).
Using impedance 120Ω connecting line.
Using impedance 120Ω connecting line.
Remark
Connect to starter coil directly.
CAN
communication
(connect
with
controller's
only).
Using impedance 120Ω connecting line.
Using impedance 120Ω connecting line.
Remark
ECU power;
Set Auxiliary output 1 as "ECU power".
shielding
line
terminal
shielding
line
terminal
Page 66 of 73