Performance And Characteristics - Smartgen HGM8140D User Manual

2 PERFORMANCE AND CHARACTERISTICS

HGM8140 military controller: ASM(Aotomatic Start module), it controls generator to start/stop by
detecting DC input voltages or remote start signals.
HGM8140 controller contains two modules: HGM8140M (host module) and HGM8140D
(display module). Two modules are communicate with each other by RS232 or CAN BUS port.
HGM8140M(host module): it is used for collecting genset parameters, monitoring and protecting
genset, and realizing genset auto start /stop function.
HGM8140D(display module): it is used for displaying genset‟s parameters, adjusting parameters
and controlling genset by the keys on the front panel of controller.
Main features are as follows:

132x64 LCD with backlight, selectable language interface (Chinese, English and Spanish),
push-button operation.

Hard-screen acrylic material been used to protect screen with great wear-resisting and
scratch-resisting functions.

Silicone panel and pushbuttons can be used in extreme temperature environment.
 RS485 communication interface enable "Three remote functions" (remote control, remote
measuring and remote communication) according to MODBUS protocol.

ETHERNET communication port can achieve multi-monitoring modes.

Equipped with CAN BUS port and can communicate with J1939 genset. Not only can monitor
frequently-used data (such as water temperature, oil pressure, speed, fuel consumption and
so on) of ECU machine, but also control starting up, shutdown , raising speed and speed
droop via CAN BUS port (need controller with CANBUS interface).

HGM8140M can connect with HGM8140 D display module, it is convenient to use in special
occasions. HGM8140 D can be set as RS232 port display module or CAN port display
module via front panel keys operation. HGM8140 D module also be set as enabled/disabled
control, if it is able to control, HGM8140M can be controlled by HGM8140D, otherwise,
HGM8140D without remote control function.

Suitable for 3-phase 4-wire, 3-phase 3-wire, single phase 2-wire, and 2-phase 3-wire
systems with voltage 120/240V and frequency 50Hz/60Hz;

Collects and shows 3-phase voltage, current, power parameter and frequency of generator or
mains.
Mains
Line voltage (Uab, Ubc, and Uca)
Phase voltage (Ua, Ub, and Uc)
Frequency Hz
Phase sequence
Load
Current IA，IB，IC
Each phase and total active power kW
Reactive power kVar
Power factor PF
Load output percentage %
Apparent power kVA
HGM8140 Military Genset Controller
HGM8140 MILITARY GENSET CONTROLLER USER MANUAL
Version 1.2 2019-09-12 Page 6 of 56