Smartgen HGM9600 Series User Manual page 17

settings screen.
★Language
Selectable Chinese, English and others (default: Espanol)
★Commissioning
On load, off load or custom commissioning can be chosen. Custom commissioning can configure on
load or not during commissioning, when to commissioning and select the mode after commissioning
(manual mode, auto mode and stop mode).
★Clear users' accumulation
Can clear total run time A and B, total electric energy A and B.
Parameter setting Including as following,
★Mains settings
★Timer settings
★Engine settings
★Generator settings
★Load settings
★Switch settings
★Analog sensor settings
★Input port settings
★output port settings
★Module settings
★Scheduling and maintenance settings
★GSM settings
Example,
Return
Mains
Timers >
Engine
Generator
Load
Switch
Temp. Sensor
OP Sensor
Level Sensor
Config. Sensor 1
Config. Sensor 2
HGM9600 Series Genset Controller User Manual
> Start Delay
> Return Delay
> Preheat Delay
> Cranking Time
> Crank Rest Time
> Safety On Time
> Start Idle Time
> Warming Up Time
> Cooling Time
> Stop Idle Time
> ETS Hold Time
> Wait Stop Time
Form 1:
Use to scroll settings,
settings (form 2),
to enter
to exit settings menu.
Page 17 of 73