Smartgen HGM9600 Series User Manual page 47

No. Type
18 Auto Mode Invalid
19 Reserved
20 Reserved
21 Inhibit Alarm Stop
22 Aux Instrument Mode
23 Reserved
24 Reset Maintenance
25 Reserved
26 Aux. High Temp
27 Aux. Low OP
28 Remote Start (On Load)
29 Remote Start (Off Load)
30 Aux. Manual Start
31 Reserved
32 Reserved
33 Simulate Stop key
34 Simulate Manual key
35 Reserved
36 Simulate Auto key
37 Simulate Start key
38 Simulate G-Load key
39 Simulate M-Load key
40 Reserved
41 Reserved
42 Reserved
43 Reserved
HGM9600 Series Genset Controller User Manual
keys except
When input is active, controller won't work under Auto mode.
key and simulate auto key input does not work.
All shutdown alarms are prohibited except emergence
stop.(Means battle mode)
All outputs are prohibited in this mode.
Controller will set maintenance time and date as default when
input is active.
Connected sensor digital input.
Connected sensor digital input.
In Auto mode, when input active, genset can be started
automatically and take load after genset normal running; when
input inactive, genset will stop automatically.
In Auto mode, when input is active, genset can be started
automatically and NOT take load after genset normal running;
when input is inactive, genset will stop automatically.
In Manual mode, when input active, genset will start
automatically; when
automatically.
An external button can be connected and pressed as simulate
panel.
An external button can be connected and pressed as simulate
panel.
This is simulate G-close key when HGM9610 controller is
applied.
This is simulate M-open key when HGM9610 controller is
applied.
Description
are inactive.
input inactive, genset will stop
Page 47 of 73