Mtu Adec(Smart Module); Mtu Adec(Sam Module); Perkins - Smartgen HGM8140D User Manual

13.12 MTU ADEC(SMART MODULE)

It is suitable for MTU engine with ADEC (ECU8) and SMART module.
Terminals of controller
Relay Output 1
Start relay output
Terminals of controller
CAN_SCR
CAN(H)
CAN(L)
Engine type: MTU-ADEC

13.13 MTU ADEC(SAM MODULE)

It is suitable for MTU engine with ADEC (ECU7) and SAM module.
Terminals of controller
Relay Output 1
Start relay output
Terminals of controller
CAN_SCR
CAN(H)
CAN(L)
Engine type: Common J1939

13.14 PERKINS

It is suitable for ADEM3/ ADEM4 engine control module. Engine type is 2306, 2506, 1106, and
2806.
Terminals of controller
Relay Output 1
Start relay output
CAN_SCR
CAN(H)
CAN(L)
Engine type: Perkins
HGM8140 Military Genset Controller
HGM8140 MILITARY GENSET CONTROLLER USER MANUAL
Table 32 ADEC (X1 Connector)
ADEC (X1port)
X1 10
X1 34
Table 33 SMART (X4 Connector)
SMART (X4 port)
X4 3
X4 1
X4 2
Table 34 ADEC (X1 Connector)
ADEC (X1port)
X1 43
X1 37
Table 35 SAM (X23 Connector)
SAM (X23 port)
X23 3
X23 2
X23 1
Table 36 Connector
Connector
1,10,15,33,34
-
-
31
32
Version 1.2
Remark
Configure relay output 1 as "Fuel Output". X1
Terminal 9 connected to negative of battery
X1 Terminal 33 Connected to negative of battery
Remark
CAN communication shielding line.
Using impedance 120Ω connecting line.
Using impedance 120Ω connecting line.
Remark
Configure relay output 1 as "Fuel Output". X1
Terminal 28 Connected to negative of battery.
X1 Terminal 22 Connected to negative of battery.
Remark
CAN communication shielding line.
Using impedance 120Ω connecting line.
Using impedance 120Ω connecting line.
Remark
Configure relay output 1 as "Fuel Output".
Connect to starter coil directly.
CAN communication shielding line
Using impedance 120Ω connecting line.
Using impedance 120Ω connecting line.
2019-09-12 Page 51 of 56