Perkins; Scania; Volvo Edc3 - Smartgen HGM6100LT Series User Manual

13.14 PERKINS

It is suitable for ADEM3/ADEM4 engine control mode. Engine type is 2306, 2506, 1106, and 2806.
Terminals of controller
Programmable output 1
Starting relay output
CAN_SCR
CAN(H)
CAN(L)
Engine type: Perkins.

13.15 SCANIA

It is suitable for S6 engine control mode. Engine type is DC9, DC12, and DC16.
Terminals of controller
Programmable output 1
Starting relay output
CAN_SCR
CAN(H)
CAN(L)
Engine type: Scania.

13.16 VOLVO EDC3

Suitable engine control model is TAD1240, TAD1241, and TAD1242.
Terminals of controller
Programmable output 1
Starting relay output
Programmable output 2
HGM6100LT Series Genset Controller User Manual
Table 33 – Connector
Connector
1, 10, 15, 33, 34
-
-
31
32
Table 34 – B1 Connector
B1 connector
3
-
-
9
10
Table 35 – "Stand alone" Connector
"Stand alone" connector
H
E
P
Remark
Set programmable output 1 as "Fuel
Output".
Connect to starter coil directly.
CAN communication shielding line.
Using impedance 120Ω connecting line.
Using impedance 120Ω connecting line.
Remark
Set programmable output 1 as "Fuel
Output".
Connect to starter coil directly.
CAN communication shielding line.
Using impedance 120Ω connecting line.
Using impedance 120Ω connecting line.
Remark
Set programmable output 1 as "Fuel
Output".
ECU power;
Set programmable output 2 as "ECU
power".
Page 47 of 50