Operation; Key Function - Smartgen HES7120-PV User Manual

4 OPERATION

4.1 KEY FUNCTION

Icon
Stop/ Reset
Start
Manual
Auto
Close
Open
Set/Confirm
Up/Increase
Down/Decrease
Home/Return
NOTE: press any key to mute alarms in main screen.
HES7120-PV Hybrid Engergy Controller
HES7120-PV HYBRID ENERGY CONTROLLER USER MANUAL
Table 4 Key Function Descriptions
Key
Shut down the inverter and stop the PV from generating
electricity in Auto/Manual mode;
Remove the alarm in stop mode;
Press for 3 seconds or over and panel indicators can be tested
(lamp test);
Press again in stop process and genset shall stop immediately.
Turn on the inverter and make PV generate power in manual
mode.
Set the module to manual mode.
Set the module to auto mode.
Control breaker close in manual mode.
Control breaker open in manual mode.
Enter menu list page;
Move cursor in parameter setting and confirm the set information.
Scrolls the screen up;
Shift cursor up or increase the set value in parameter setting.
Scrolls the screen down;
Shift cursor down or decrease the set value in parameter
setting.
Return to home page in main interface;
Return to last interface in parameter setting;
Press for 3 seconds or over, trip alarm can be reset.
Description
2020-05-20 Version Page 10 of 59