Operation; Key Function - Smartgen HGM4020DC User Manual

4

OPERATION

4.1 KEY FUNCTION

Icon
Stop/ Reset
Start
Manual
Auto
Close/Open
Set/Confirm
Up/Increase
Down/Decrease
HGM4020DC Genset Controller
Table 3 - Key Function Description
Function
Stop running generator in Auto/Manual mode;
In case of alarm condition, pressing the button will reset alarms;
In stop mode, pressing and holding the button for 3 seconds will
test indicator lights (lamp test);
During stopping process, press this button again to stop generator
immediately.
Under manual mode, press this button will start genset; press this
button during genset start up, genset will jump to next status and
genset can fast-boot.
Pressing this key will set the module into manual mode.
Pressing this key will set the module into auto mode.
Reserved
Pressing this key will enter into Main Menu;
In setting parameter status, press this key will shift cursor or
confirm setting value.
Scrolls the screen up; Shift the cursor up or increase the set
value in parameter setting menu.
Scrolls the screen down; Shift the cursor down or decrease the
set value in parameter setting menu.
HGM4020DC GENSET CONTROLLER USER MANUAL
Description
Version 1.0 2019-04-10 Page 7 of 31