Lw3 Commands - Quick Summary - Lightware MX2-8x8-HDMI20-L User Manual


  
7. LW3 Programmers' Reference
8.14. LW3 Commands – Quick Summary
System Commands
Querying the Product Name
Ý GET·/.ProductName
Setting the Device Label
SET·/MANAGEMENT/UID/DeviceLabel=<Custom_name>
Ý
Querying the Serial Number
Ý GET·/.SerialNumber
Resetting the Matrix
Ý CALL·/SYS:softReset()
Restoring the Factory Default Settings
Ý CALL·/SYS:factoryDefaults()
Switching to Standby Mode
Ý CALL·/MANAGEMENT/POWER:standby()
Switching to Normal Mode
Ý CALL·/MANAGEMENT/POWER:wakeUp()
Switching and Crosspoint Settings
Query the Video Crosspoint State
Ý GET·/MEDIA/XP/VIDEO.DestinationConnectionStatus
Switching an Input to an Output
Ý CALL·/MEDIA/XP/VIDEO:switch(<in>:<out>)
Switching an Input to All Outputs
Ý CALL·/MEDIA/XP/VIDEO:switchAll(<in>)
Multiple Switching
Ý CALL·/MEDIA/XP/VIDEO:switchMulti(<out1_source>;<out2_source>;...;<out8_source>)
Video Input Port Settings (HDMI and DisplayPort)
Querying the Status of the Source Ports
Ý GET·/MEDIA/XP/VIDEO.SourcePortStatus
Muting an Input Port
Ý CALL·/MEDIA/XPVIDEO:muteSource(<in>)
Unmuting an Input Port
Ý CALL·/MEDIA/XP/VIDEO:unmuteSource(<in>)
MX2-HDMI20 series – User's Manual
Locking an Input Port
Ý CALL·/MEDIA/XP/VIDEO:lockSource(<in>)
Unlocking an Input Port
Ý CALL·/MEDIA/XP/VIDEO:unlockSource(<in>)
Setting the HDCP State
SET·/MEDIA/PORTS/VIDEO/<in>/SETTINGS.HdcpVersion=<HDCP_ver>
Ý
Setting the Audio Mode
SET·/MEDIA/PORTS/VIDEO/<in>/EMBEDDEDAUDIO.AudioMode=<audio_mode>
Ý
Sending CEC Commands Towards the Source
Sending an OSD String
SET·/MEDIA/PORTS/<in>/CEC.OsdString=<text>
Ý
Ý CALL·/MEDIA/PORTS/VIDEO/<in>/CEC:send(set_osd)
Sending a CEC Command in Text Format
Ý CALL·/MEDIA/PORTS/VIDEO/<in>/CEC:send(<command>)
Sending a CEC Command in Hexadecimal Format
Ý CALL·/MEDIA/PORTS/VIDEO/<in>/CEC:sendHex(<hex_command>)
DisplayPort Input Settings
Setting the Maximum Lane Number
SET·/MEDIA/PORTS/VIDEO/<input>/SETTINGS.DpMaxLaneCount=<lane>
Ý
Setting the Maximum Link Data Rate
SET·/MEDIA/PORTS/VIDEO/<input>/SETTINGS.DpMaxLinkRate=<data_rate>
Ý
Enable the Test Pattern
SET·/MEDIA/PORTS/VIDEO/<input>/SETTINGS.TpgMode=<tpg_status>
Ý
Setting the Conversion Mode
SET·/MEDIA/PORTS/VIDEO/<input>/SETTINGS.Conversion=<conversion_mode>
Ý
Restart Link Training
Ý CALL·/MEDIA/PORTS/VIDEO/I1/SETTINGS:dpLinkTrain()
70