Controllock; Front Panel Lcd Menu Operations; Introduction - Lightware MX2M-FR24R User Manual

   
3. Front Panel Control
Locking an Output in Autotake Mode
Step 1. Press and release the required destination
button. Now the selected destination
button and the currently configured source
button light up (view mode).
Step 2. Press and release the Output Lock button.
Now the Output Lock button lights up in
red, and lock function is activated at once.
No source can be changed at the locked
destination.
Unlocking an Output in Autotake Mode
Step 1. Press and release the required destination
button which was previously locked. Now
the selected destination button and the
currently configured source button and the
Output Lock button light up.
Step 2. Press and release the Output Lock button (deselection). Now the Output Lock button turns off and the
port has been unlocked.
3.1.6. Control Lock

DEFINITION: The Control Lock means to disable the front panel buttons.
While the front panel buttons are disabled the
RS-232, USB and Ethernet control is still enabled.
If the button is not illuminated, front panel button
operations are enabled. If it illuminates red
continuously, front panel operations are inhibited
(including LCD menu).
Press and hold the Control lock button for 3
seconds to toggle the control lock state.

#controllock

#button
Applied firmware package: v1.0.0 | LDC software: v2.4.0b3
Hybrid Modular Matrix Switcher series – User's Manual
3.2. Front Panel LCD Menu Operations
3.2.1. Introduction
The company logo is displayed on the screen during the boot-up. The main menu is displayed after about 30
seconds later and the device is ready to use.
Menu Navigation
The front panel has a color LCD that shows the most important
settings and parameters structured in a menu. The jog dial
control knob can be used to navigate between the menu items
or change the value of a parameter. The knob can be pressed to
enter a menu or edit/set a parameter.

TIPS AND TRICKS:
faster the parameter list is scrolled.
The Menu Structure
MAIN MENU
System Settings
C C O O N N T T R R O O L L
L L O O C C K K
EDID
Presets
Parameter Selection
The blue colored line means the selected menu/parameter, the
Enter the Menu / Submenu
The icon before the line indicates the additional submenus. Click with the rotary to enter.

The icon shows that there is no submenu or setting possibility.

The faster you rotate the jog dial, the
Network
Time and Date
Restore Factory Defaults
Display Brightness
View
Factory EDIDs
Last attached EDIDs
User EDIDs
Emulated EDIDs
Switch
Save
Load Preset
Save Preset
green
25
Menu selection
Menu navigation
& change parameter & set parameter
Press
Turn
one means the current setting.