Figure 27 Vdsl Psd Profile Setup; Table 16 Vdsl Psd Profile Setup - ZyXEL Communications VDSL SWITCH VES-1616F-3X User Manual

Figure 27 VDSL PSD Profile Setup

The following table describes the labels in this screen.

Table 16 VDSL PSD Profile Setup

LABEL
Profile Name
Add New Profile
Add
Down Stream /
Up Stream
Tone Freq
PSD Level (dBm/
Hz)
Add
BreakPoint
Tone Freq
PSD Level (dBm/
Hz)
Delete
Profile Name
Applied Ports
Delete
Cancel
VES-1616F-3x Series User's Guide
DESCRIPTION
Enter a descriptive name for identification purposes. This field is configurable only
when you click the Add New Profile link.
Click this link to add a new profile.
Click Add to save the new profile to the Switch. It then displays in the summary
table at the bottom of the screen.
Enter a downstream or upstream tone frequency between 0 and 30000 (in kHz).
Specify a downstream or upstream PSD value between 125 and 1400 in units of -
0.1 dBm/Hz. For example, if you want to set the transmit power to -20 dBm/Hz,
enter 200.
Click Add to save the new breakpoint to the Switch. It then displays in the
summary table in the center of the screen.
This is the index number of each breakpoint.
This displays the tone frequency for this breakpoint.
This displays the transmit power for this breakpoint.
Check the breakpoint(s) that you want to remove in the Delete column and then
click the Delete button.
This field displays the descriptive name for this profile.
You can apply a profile to a VDSL port in the Port Setup screen.
This field displays the VDSL port number(s) to which this profile is applied.
Check the profile(s) that you want to remove in the Delete column and then click
the Delete button.
Click Cancel to clear the selected checkboxes in the Delete column.
Chapter 6 Basic Setting
83