This command displays the MAC address(es) stored in the switch. The following example
shows the MAC address table.
sysname# show mac address-table all
Port
18
18
18
18
18
18
18
sysname#
33.2.5 show multi-login
Syntax:
show multi-login
This command displays the multiple login settings or the number of CLI management
sessions.
The following example shows that there are currently one console port and one Telnet sessions
to the switch.
sysname# show multi-login
[session info ('*' denotes your session)]
index session
----- ---------- ---------------
*
1 console
2 telnet-d
sysname#
If the multiple login feature is disabled (using the
mode), the screen displays as shown.
sysname# show multi-login
multi-login is disabled
sysname#
33.2.6 show system-information
Syntax:
show system-information
VES-1616F-3x Series User's Guide
VLAN ID
MAC Address
1
00:02:e3:30:43:34
1
00:04:80:9b:78:00
1
00:0d:60:8f:09:a1
1
00:0f:fe:1e:4a:e0
1
00:13:49:22:a3:3b
1
00:c0:9f:cd:cc:5f
1
00:c0:a8:fa:e9:27
remote ip
-
172.23.37.10
Chapter 33 Command Examples
Type
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
command in Config
no multi-login
245